PPF guide
What is paint protection film (PPF)?
Paint protection film (PPF) is a clear or colored polyurethane film applied over a car's paint. It takes the stone chips, scratches, sand and sun that would otherwise damage the original paint, and it can be removed later without harming the paint underneath.
What is PPF made of?
Modern PPF is made of TPU (thermoplastic polyurethane): a soft, stretchy film that absorbs impacts. It has three main layers: a top coat that resists stains and can self-heal light scratches, the TPU body that absorbs stone chips, and a pressure-sensitive adhesive that holds the film on the paint and comes off cleanly later.
Good PPF uses aliphatic TPU, which does not turn yellow with heat and humidity. That matters a lot in hot climates like the Gulf.
What does PPF protect against?
- Stone chips from highways and construction roads
- Light scratches and swirl marks from washing
- Sand and dust abrasion in desert driving
- Bird droppings, insects and tree sap that etch the clear coat
- UV and heat fading of the paint
Clear, satin, colored and black PPF
Clear gloss PPF keeps the original color and adds gloss. Satin (matte) PPF turns gloss paint into a satin finish while protecting it. Colored PPF changes the car's color like a wrap, but with the protection of PPF. Black PPF gives a gloss black look on roofs, mirrors and trims.
SonicMOTOR makes all four: five clear films (P-100, G-Elite, F-100, G-100, H-100), Y-100 Satin, Colored PPF in 220 shades and L-100 Black.
PPF thickness: mil and microns
PPF thickness is measured in mil (thousandths of an inch). 1 mil = 25.4 microns (µm), so 7.5 mil ≈ 190 µm, 8.5 mil ≈ 216 µm and 9.5 mil ≈ 241 µm. Thicker film absorbs more impact energy; thinner film is easier to stretch around complex panels.
SonicMOTOR clear films go from 7.5 mil (G-100, H-100) to 8.5 mil (G-Elite, F-100) and 9.5 mil (P-100).
Does PPF really self-heal?
Yes, light scratches in the top coat close up again. Some films need heat (warm sun or warm water), others heal at room temperature. SonicMOTOR P-100, F-100 and H-100 heal with heat; the G-Series (G-Elite, G-100) heals at room temperature. Deep cuts through the film do not heal.
How long does PPF last?
A quality film installed by a trained shop usually lasts as long as its warranty, and often longer. SonicMOTOR warranties range from 5 years (H-100, Colored PPF) to 7 years (F-100, G-100, Y-100), 8 years (G-Elite) and 10 years (P-100). Each warranty is registered online by the installing shop, so the owner can check it any time with the VIN, plate or phone number.
Next steps
Frequently asked questions
Is PPF worth it?
If you keep a car for several years, drive on highways or in sandy areas, or own a car with expensive paint, PPF usually costs less than repainting and keeps the original factory paint, which helps resale value.
Can PPF be removed?
Yes. A quality PPF peels off without damaging factory paint and without leaving glue residue. Removal should be done by a trained installer.
Full body or front only?
Front-end packages (bumper, bonnet, fenders, mirrors) cover the areas hit most by stones. Full-body PPF also protects doors and rear panels from scratches and keeps the whole car in one finish.
What is the difference between PPF and vinyl wrap?
Vinyl wrap is thinner and mainly changes the look. PPF is a thicker TPU film made to absorb impacts and self-heal. Colored PPF combines both: a new color with PPF-level protection.

